Standard operating process of laser cutting machine

Laser cutting machine is an important equipment for sheet metal processing, the correct use of laser cutting machine is also an important premise to improve its service life, so we buy the machine, need to master the standard machine operation process and methods, so as to reduce the failure rate, improve the service life, below we will introduce the standard operation process of laser cutting machine:

First of all, strictly in accordance with the regulations, follow the principles of laser cutting machine equipment startup, shutdown, do not force close or open;

Secondly, employees are not allowed to operate the machine without training, and only after complete training can they operate the machine;

Third, in the process of laser cutting machine work, foreign personnel must not be close to the operation table and console, the core operation link must be completed by professional people;

Fourth, adjust the optical path of the machine tool, adjust the cutting head under the follow-up method, and force to follow the accurate control process to ensure man-machine safety;

Fifth, every time you turn on the machine, return to the reference point, check the processing of the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1Mpa;

Sixth, check once a week the external optical path of the laser cutting machine equipment to protect the gas, cold road cabinet, cooling river road, air compressor, cold dryer, and discharge the water of the filter.